Sunday, October 16, 2011

AirControl S

Aircontrol S 1

Aircontrol S 2

The negative pressure monitors aircontrol S1 and S2 are designed for monitoring low negative or positive pressure differentials. Accurate pressurisation is a vital step in creating a compliant, controlled and safe environment. Ideally suited for monitoring pressure differentials in critical applications.
The pressure readings are instantaneous and accurate with many optional features to allow for custom designed upgrades (i.e. number of measuring channels, battery operation, USB flash drive, printer, combination with our communication unit Telealarm GSM).

A large display readout identifies instantaneous pressure changes. The large display allows to adjust custom alert set points (both audible and visual). Pressure readings are accurate with audio and visual alarms. If the aircontrol S1 and S2 unit is identifying unsatisfactory conditions the device will set off the alarm with time-stamped readings. In combination with the Telealarm GSM device, the aircontrol S units will pass on the alarm to the communications unit which will trigger a phone call to your preset number(s).

Technical data:


 
S 1
Art.-No. 480
S 2
Art.-No. 481
Measurements in mm ( LxBxH )
305 x 350 x 177
475 x 350 x 177
Weigth
5,5 kg
7,9 kg
Connection
230 V / 16 A
230 V / 16 A
Range of measurement
0 - 50 Pa
0 - 50 Pa
Pressure resistance dynamometer
max. 0,1 bar
max. 0,1 bar
Occupied extension plug-in positions
1
1
Occupied extension plug-in positions
4
10
 
 
Basic equipment and upgrades:
 
 
S 1
S 2
 
Lockable housing, powder-coated
Big Display with backlight
Keyboard secured from vandalism
Dry alarm contact
Alarm plug 230 V / 16 A
X
Measuring connection for tube 8 x 1 mm
Art.-No.
1 piece measuring channel
Additional measuring channel
O
(max. 4)
O
(max. 7)
BE2324
Communication module (PC-connection)
i.V.
i.V.
BE2325
Printer module (occupies 3 free plug-in positions)
O
O
BE2326
Emergency current battery (occupies no plug-in position)
X
O
BE2327
Measuring data memory module
O
O
BE2328
In- / Output module (optional switch contacts)
i.V.
i.V.
BE2329
Telealarm GSM
i.V.
i.V.
BE2330
█ = in series     O = optional     X = not available     i.V. = in preparation

0 comments:

Post a Comment